Documents and Software: Download Brochures, Presentations, Firmware, Drivers and Software. Documents and Software. Contact Hytera America. Do you have questions. Open Box Hytera PD782 UHF HT w/GPS 400-470MHz 1024ch, 4W,Keypad 2000mAh. The PA7 Series is built to the DMR Standard and is rich in features for both voice and data communication. The design is approved to rigorous IP67 and MIL-STD 810 testing. The Hytera-patented pseudo-trunking maximizes channel usage.
- Models includes are the PD702, PD702G, PD752, PD782, PD782G & PD792EX. CPSFLASH-Hytera - CPS Programming Software Loaded on Flash Drive - Enter Hytera Radio Model.
- HYTERA PD602 Programming Software DMRSWCPSV8.01. 1 offer from $45.00. Diamond (Original) SRH77CA 144/440 MHz. Dual-Band High Gain Handheld Antenna Rx: 120900 MHz. 2.15 dBi, Max Power: 10 Watts, Length: 15') SMA.
When you own a Hytera DMR transceiver you need an optional cable costing 35 euro to program your transceiver and/or to upgrade the firmware. In my opinion, programming cables should never be an option. You can spend the 35 euro to buy one, or spend about 5 euro to make one yourself.
The self-build version had one big advantage above the commercial one: it fits in the back of the transceiver so no need to change the microphone every time you want to program an extra channel.
German operator DJ8TM had created some nice drawings on how to build it. Keep in mind you can only buy the connector for the MD785(G) and the RD985(G), not the portable sets since these use some sort of Hytera made proprietary connector. You also notice these cables don’t have a CPS/FW switch to change the cable from a programming cable to a firmware-update cable. Don’t worry, switching can be done with the default microphone and the default microphone hang clip (which has some sort of magnetic contact). The mentioned cables work in CPS mode (programming) by default. If you want to switch to firmware-update mode simply connect the microphone to the microphone (wall)clip and it’s in FW mode.
N.b.: This cable does not work in combination with the SM-19 DTMF microphone. The default mike is okay.
Shopping list (Conrad):
Hytera Pd782g Programming Software Manual
- 741650-89 Assmann WSW A-HDS 26 LL/Z D-SUB male connector 180 °
- 715980-89 Assmann WSW A-FT 15 D-SUB case
- 502149-89 (Option: Ferrite, you should have some in the part-box)
- USB cable (you should have some in the part-box)
Total cost: less than 5 euro (excluding shipping)
Programming software, free download
[important]Download the electronic circuit[/important]